UK Christmas orders: please order by Fri 11 December. See delivery dates.
Ideas from Top Of The Door

How to measure your doorframe for a door topper

A tape measure and a close look at the top of your frame make choosing much easier.

A black THE LOO door topper resting above a white interior doorframe

Measure the ledge you actually have

Look at the top edge of the frame, rather than the doorway opening. You need a flat, level resting surface that supports the decoration securely. Rounded or sloped trim can let a piece rock or slip.

Note three measurements

  1. Measure the usable width along the ledge.
  2. Measure the depth of the flat support from front to back.
  3. Measure clear space above it, including shelves, wall lights and changes in the wall shape.

Our toppers come in the widths offered on each product: 20 cm, 30 cm and 38.5 cm. All are 5 cm tall and 5 mm thick. Compare those physical dimensions with your frame and leave room to place and remove the piece.

Check the door in use

The topper rests above the frame with no fixings. Support the whole design while placing it, then open and close the door gently. It must stay steady and clear of moving parts. If the fit is uncertain, remove it and ask us before ordering.

Send us the useful details

For a fitting question, email the product name, your measurements and a photograph showing the top of the frame. We respond within a few hours. The fitting guide brings the placement and safety checks together.

For a hallway compare Love You, Bye with Always Come Home. Open each product to choose the width that fits the space you measured.

Check the space, then choose your width

Schematic of topper width, 5 cm overall height and 5 mm thickness above a flat doorframe
Product dimensions, not to scale. Choose only a size offered by the product.
A black THE LOO door topper resting above a white interior doorframe
An existing product photograph of a topper resting on a flat frame. Measure your own frame and check secure placement.
  1. Find a flat, level ledge. The topper rests on top of the frame without fixings. Rounded, sloped or uneven trim may not provide secure support.
  2. Measure the usable width. Choose from the widths available on the product page: 20 cm, 30 cm or 38.5 cm.
  3. Check height and depth. The toppers are 5 cm tall and 5 mm thick. Measure the supporting ledge and overhead space; allow room to position and lift the decoration safely.
  4. Test the door gently. Place the topper securely, then open and close the door slowly. Keep it clear of moving parts and remove it if it shifts or falls.

If you need help choosing a width, send us your measurements before ordering.

Ask a fitting question · Find your door topper

Designs in this story

Shop all