UK Christmas orders: please order by Fri 11 December. See delivery dates.
Top Of The Door / Help & good-to-knows

How to Measure & Fit a Door Topper

Three widths. Clear measurements. A simple resting fit without fixings.

Start with your frame

The topper rests on top of a suitable flat doorframe. No fixings are needed. Check that the top of the frame is level and offers secure support; rounded, sloping or uneven trim may not be suitable.

Compare the measurements

Choose the width offered on your product page: 20 cm, 30 cm or 38.5 cm. All toppers are 5 cm tall and 5 mm thick. The published width describes the whole decoration, not the door opening.

Measure usable width, the supporting ledge and the clear space above it. Leave enough room to position and lift the topper safely.

Rest it securely, then check the door

Support the whole piece as you place it on the frame. Open and close the door slowly and check that the decoration remains steady and clear of moving parts. Remove it if the frame does not support it securely or it moves when the door is used.

These are indoor decorations, not toys. Keep them clear of heat and out of reach of children and pets. Recheck the position after dusting or moving it.

Unsure about the fit?

Email [email protected] with the product name, a photograph of the top of your frame and your measurements. We respond within a few hours. Do not order on the assumption that every frame profile will work.

Browse all door toppers, read the measuring guide or see care instructions.

Check the space, then choose your width

Schematic of topper width, 5 cm overall height and 5 mm thickness above a flat doorframe
Product dimensions, not to scale. Choose only a size offered by the product.
A black THE LOO door topper resting above a white interior doorframe
An existing product photograph of a topper resting on a flat frame. Measure your own frame and check secure placement.
  1. Find a flat, level ledge. The topper rests on top of the frame without fixings. Rounded, sloped or uneven trim may not provide secure support.
  2. Measure the usable width. Choose from the widths available on the product page: 20 cm, 30 cm or 38.5 cm.
  3. Check height and depth. The toppers are 5 cm tall and 5 mm thick. Measure the supporting ledge and overhead space; allow room to position and lift the decoration safely.
  4. Test the door gently. Place the topper securely, then open and close the door slowly. Keep it clear of moving parts and remove it if it shifts or falls.

If you need help choosing a width, send us your measurements before ordering.

Ask a fitting question · Find your door topper